The 1st video below shows you how to find the starting shade of your existing teeth – 3:24 seconds
The 2nd video shows you how to correctly use our teeth whitening mouth tray – 3.55 seconds
The 3rd video below shows you how to setup, position and activate the Laser light – 4.05 seconds
The 4th video below shows the Laser teeth whitening procedure from start to finish – 5.08 seconds.
Here’s a written version of the whitening treatment.
1: Find your starting shade, then position the light close to where you want to sit and connect to wall socket, switch on
2: Pre-set LED position
3: Remove the FIRST PRE-FILLED WHITENING TRAY from its foil packet, place it in your mouth – put LED over mouth – turn on light for 20 minutes
4: When light stops, place used mouth tray in beaker – reduce timer from 20 minutes to 15 minutes
5: Place the SECOND PRE-FILLED WHITENING TRAY in mouth – put LED over mouth – turn on light for 15 minutes
6: When light stops, place used mouth tray in beaker.
7: Place the THIRD PRE-FILLED WHITENING TRAY in mouth – put LED over mouth – turn on light for 15 minutes
8: When light stops, place the final used mouth tray in beaker – treatment complete – now check finishing shade
Video number THREE shows the actual treatment procedure in greater detail and supplies helpful advice.
At The End Of The Treatment
When you’re finished, the following items are collected
1: Light, or lights if two delivered
2: Protective glasses, 2 if 2 delivered
3: Shade guide in its box
Two and three are placed into the clear plastic box which we delivered them in.
We suggest the beaker (or beakers if there are two) containing the used trays have liquid soap placed into them and they’re washed out thoroughly using hot water in a sink, after which place them into your non recyclable bin together with the used syringes, the syringes themselves should have any unused gel (If there is any) expelled before being binned.